Streambox Cloud with Sessions Workflow: Best Practices, Part 3

Part 1: Session Setup
Part 2: Cloud LDMP Settings

3. Set up Encoder
Here are our Encoder Settings Video/Audio Settings. How you enter them will vary depending on which Encoder product you're using.

Streambox Spectra software: Use the Audio/Video tab.

Streambox Chroma-based hardware: Use the Config tab in the web control panel to set these settings.

http://update.streambox.com/up...

Encoder Settings Video/Audio Settings

• Target Bitrate = 6000 Kbps
• VBR = 0.6sec
• FEC = OFF
• AP = ON
• Resolution = HD Full
• Frame Rate = Full Frame
• Key Frame = 300
• Deinterlace = OFF
• Audio Codec = AAC
• Channels ( Audio ) = 2
• Sample Rate ( Audio ) = 48000
• Color Profile = 4:2:0 or 4:2:2

Encoder Network settings (LDMP)

For Streambox Spectra, these are found on the Transport tab.

For Streambox Chroma, these are found on the Network tab.

Enable Manual LDMP, if necessary, and set the following settings.

• CWND = 200
• CWND_MIN = 200
• CWND_MAX = 200
• ACK_TO = 300 -- Note, you can decrease ACT_TO to 100 if your Encoder and Client are located nearby with low network delays.
• SND_TO = 4000
• RTT Multiplier = 2
• JITTER2 % = 0 ** -- Note, you can increase jitter2 up to 20% to minimize rebuffer
• Shaping % = 110